CONTACT US NOW TO RECEIVE A QUICK QUOTE, SAMPLE SUPPORT, AND ENGINEERING SERVICE GUARANTEE.

All Categories
Blogs

Aluminum Strip Ceiling Price per m² 2026 – FOB Guangzhou

2026-11-11 20:26:17
Aluminum Strip Ceiling Price per m² 2026 – FOB Guangzhou

In 2026, a standard aluminum strip ceiling costs about US$9.6–11.0 per m² FOB Guangzhou for the most common spec: 84R strips, 0.5 mm thick, white powder coat. Strip ceiling prices depend mainly on thickness, finish and strip width: narrow strips have more edges per m², and going from 0.4 mm to 0.8 mm doubles the aluminum. Prices below include export packing and delivery to Guangzhou port, orders of about 1,000 m², valid for 15 days.

Have a drawing? Send it on WhatsApp and our engineers will price your exact spec within 24 hours. Chat on WhatsApp →

Strip ceiling price by profile (2026)

Basis: 0.5 mm thickness, white powder coating, panels only, FOB Guangzhou.

Profile Face width / edge height / module (mm) Aluminum used (kg/m²) Price, FOB Guangzhou (US$/m²) Typical use
84R (rounded edge) 84 / 25 / 86 2.36 9.6–11.0 Corridors, malls, transport halls
85C (straight edge) 85 / 22 / 87 2.26 9.2–10.6 Offices, retail
100 closed joint 100 / 23 / 100 2.20 8.9–10.3 Bathrooms, kitchens, humid areas
150C 150 / 25 / 152 1.93 7.8–9.0 Mall concourses, lobbies, airports
200 200 / 28 / 202 1.82 7.4–8.5 Airports, exhibition halls
300 wind-resistant 300 / 30 / 303 1.68 6.8–7.9 Gas station canopies, outdoor soffits

All profiles are roll-formed from 1100/3003 primary aluminum coil and cut to any length from 3 to 6 m. Every quotation comes with the CAD profile drawing.

Why narrow strips and thicker metal cost more

A strip ceiling is a row of folded aluminum strips. Each strip uses its face width plus two side edges and two returns, so the metal in every m² follows this formula:

Aluminum per m² (kg) = (face width + 2 × edge height + returns) ÷ module × thickness (mm) × 2.71

Narrow strips have more edges in every m², so at the same thickness an 84R ceiling uses about 40% more aluminum than a 300 mm one. Thickness matters just as much: 0.8 mm uses 60% more metal than 0.5 mm. At the LME aluminum price of about US$3.12/kg (November 6, 2026), the metal alone in an 84R strip ceiling costs:

Thickness Aluminum (kg/m²) Metal value (US$/m²)
0.4 mm 1.89 5.9
0.5 mm 2.36 7.4
0.6 mm 2.84 8.8
0.8 mm 3.78 11.8

LME is the price of primary ingot. Coated coil costs more, so read these figures as the floor of any honest quote.

Want a price for your exact profile and thickness? Tell us the spec and area and we will send a priced quotation sheet. Request a quote →

Strip profiles explained

  • 84R and 85C: narrow strips with a fine 2 mm shadow line between them. 84R has rounded edges for a soft look; 85C has straight edges for a crisp, architectural line.
  • 100 closed joint: strips lock edge to edge with no gap, giving a flat surface that is easy to clean. Best for bathrooms, kitchens and other humid areas.
  • 150C and 200: wider strips with fewer lines and a calmer look for concourses, lobbies and airports.
  • 300 wind-resistant: a 30 mm high edge makes the strip stiff enough for outdoor soffits and gas station canopies exposed to strong wind.

Browse our aluminum strip ceiling products.

Other factors that change the price

  • Thickness: 0.6 mm uses 20% more metal than 0.5 mm; 0.8 mm uses 60% more.
  • Strip width: narrow strips use more aluminum per m² than wide ones.
  • Finish: wood-grain transfer, PVDF and anodized brushed or mirror finishes cost more than white powder coat.
  • Perforation and acoustic fleece: perforated strips with a fleece backing add punching and material cost.
  • Curved strips: cold-bent strips (minimum radius 1.5 m) need extra forming.
  • Aluminum price: strip prices follow the aluminum ingot price. Quotations are valid for 15 days, and price locking can be agreed when the market moves sharply.
  • Quantity: orders below the MOQ cost more per m² because set-up cost is shared over fewer meters.

Add-on prices

Option Extra cost (US$/m²)
0.6 mm instead of 0.5 mm +1.9–2.2
0.8 mm instead of 0.5 mm +5.6–6.4
Black or standard RAL color (no tooling fee) +0.3–0.5
Wood-grain heat transfer +0.7–1.0
PVDF, three coats +1.1–1.5
Brushed or mirror anodized +1.7–2.2
Perforation (ø 2.3 mm) + 30 mm acoustic fleece +0.8–1.3
Curved strips, cold-bent (radius ≥ 1.5 m) +2.1–3.6

Thickness surcharges are for 84R strips. Wider strips use less metal per m², so their surcharge is lower.

Suspension and accessories

Strip ceilings clip onto toothed carriers hung from main runners on threaded rods. Our panel prices do not include the suspension system. Here is what it costs per m²:

Accessory Specification Cost (US$/m²)
Toothed carrier Spaced ≤ 1,200 mm 0.50–0.60
Main runner 50-series hot-dip galvanized light steel 0.30–0.40
Rods and hangers M6 fully threaded rods 0.17–0.26
L-shaped edge trim Spread over the ceiling area 0.22–0.32
Filler strips For joints between strips 0.07–0.12
Total 1.3–1.7

Freight

Strip ceilings pack in long export cartons, stood upright on pallets. A carton of 6 m strips holds about 12–15 m², and one 40HQ holds about 2,800–3,200 m², depending on profile and thickness. Ask for a CIF price to your port if you want to compare landed cost. See how we pack long profiles in our packaging and shipping guide.

Project examples

Project Profile Area
Gas station canopies, Pearl River Delta, China (completed 2025) 300 wind-resistant, 0.8 mm 8,500 m²
Main concourse of a large shopping mall, Baiyun New Town, Guangzhou 150C, white, 0.6 mm 12,000 m²

The gas station canopies use the 300 mm high-edge profile at 0.8 mm because they face strong wind outdoors, and they remain in good condition today. The mall concourse uses 150C at 0.6 mm for a flat, even surface over a long, open space.

How to spot a quote that is too cheap

  1. Compare it with the metal value. The aluminum alone in 0.5 mm 84R strips is worth about US$7.4/m². A quote close to that figure probably uses thinner metal or lower edges than stated.
  2. Ask for base-metal thickness. "0.5 mm" measured over the coating may be 0.4 mm of aluminum.
  3. Ask for the profile drawing. Lower edges and narrower returns save metal but make strips flimsy.
  4. Check what is included. Panels only, or panels plus carriers and accessories?

Not sure who you are buying from? Read Factory vs Trading Company: How to Choose an Aluminum Ceiling Supplier.

How to get an accurate quote

Send us these six points:

  1. Profile (e.g. 84R, 85C, 150C)
  2. Base-metal thickness
  3. Color or finish
  4. Strip length and total area in m²
  5. Open or closed joint, and whether you need filler strips
  6. Delivery port

Get a quotation in 24 hours. MOQ is 300 m². Lead time is about 10 days for white powder coat and 20 days for special finishes. Quotations are valid for 15 days. Get a Quote →

Compare all systems in Aluminum Ceiling Price per m²: What Affects the Cost.

FAQ

How much does an aluminum strip ceiling cost per m²?

For 84R strips, 0.5 mm thick in white, expect about US$9.6–11.0 per m² FOB Guangzhou in 2026. Thicker strips and special finishes cost more.

Are narrow strips more expensive than wide ones?

Yes. Narrow strips have more edges per m², so at the same thickness an 84R ceiling uses about 40% more aluminum than a 300 mm one.

What thickness should I choose?

0.5 mm suits most interiors. Choose 0.6 mm or more for wide strips, long spans, high-traffic areas or semi-outdoor canopies.

What is the difference between 84R and 85C?

Both are narrow strips with a fine shadow line between them. 84R has rounded edges; 85C has straight edges. The price is similar.

Does the price include the suspension system?

No. Our prices include export packing and delivery to Guangzhou port, but not carriers, runners or hangers. A full accessory set adds about US$1.3–1.7 per m².