CONTACT US NOW TO RECEIVE A QUICK QUOTE, SAMPLE SUPPORT, AND ENGINEERING SERVICE GUARANTEE.

All Categories
Blogs

Aluminum Solid Panel (Veneer) Price per m² 2026 – FOB Guangzhou

2026-11-13 20:37:54
Aluminum Solid Panel (Veneer) Price per m² 2026 – FOB Guangzhou

In 2026, a standard 2.5 mm aluminum solid panel with two-coat PVDF costs about US$35.9–37.2 per m² FOB Guangzhou, priced on the unfolded area. Thinner 2.0 mm panels start at about US$31; 3.0 mm panels for high-wind facades cost about US$41. Before you compare quotes, check two things: whether the price is per unfolded or projected area, and whether it includes the sub-frame. Those two points alone can move a quote by 30% or more.

Have facade drawings? Send them on WhatsApp and our engineers will return a priced panel schedule within 24 hours. Chat on WhatsApp →

Aluminum solid panel price by thickness (2026)

Basis: 3003-H24 aluminum, flat panel about 1200 × 600 mm, 20 mm folded edges, two-coat PVDF (PPG or AkzoNobel paint), standard stiffeners and brackets, fumigation-free plywood crates, orders of 500–1,000 m², FOB Guangzhou (Nansha or Huangpu) or Shenzhen (Yantian). Freight and insurance not included.

Thickness Price, FOB Guangzhou (US$/m², unfolded area) Typical use
1.5 mm 26.2–27.6 Interior ceilings and walls
2.0 mm 31.0–32.4 Interior ceilings, low-rise facades, canopies
2.5 mm 35.9–37.2 Standard exterior facades (most popular)
3.0 mm 40.7–42.1 High-rise and high-wind facades, large panels
4.0 mm 47.6–50.3 Very large panels, coastal and high wind-load projects

Unfolded area vs projected area: read this before you compare

A solid panel has folded edges on all four sides. Most Chinese factories, including us, price by the unfolded area: the flat sheet before folding. The folded edges, standard brackets and stiffeners (spaced ≤ 600 mm) are all included in that price.

Your drawings, however, usually show the projected area: the face you see on the wall. For a 1200 × 600 mm panel with 20 mm edges, the unfolded area is about 10% larger than the projected area; for small panels or deep edges the gap reaches 15–20%. So a quote that looks cheaper may simply be on a different basis. We can quote either way, but the basis must be agreed before signing to avoid disputes at settlement.

What the metal alone costs

At the LME aluminum price of about US$3.12/kg (November 6, 2026), the aluminum in 1 m² of unfolded panel costs:

Thickness Aluminum (kg/m²) Metal value (US$/m²)
1.5 mm 4.07 12.7
2.0 mm 5.42 16.9
2.5 mm 6.78 21.1
3.0 mm 8.13 25.4
4.0 mm 10.84 33.8

On top of the metal come PVDF paint, folding, stiffeners, brackets and crating. Panel prices follow the aluminum price: every US$100/t change moves the price of a 2.5 mm panel by about US$0.7/m². If a quote is close to the metal value, the panel is probably thinner than stated or the paint is not a branded PVDF.

Want a quote for your exact panel sizes? Send your panel schedule and we will price it on the basis you prefer. Request a quote →

Which thickness and alloy should you choose?

  • 2.0 mm: interior ceilings and walls, low-rise facades and canopies.
  • 2.5 mm: the standard choice for most exterior facades.
  • 3.0 mm and up: high-rise buildings, high wind loads, coastal sites and panels wider than about 1.3 m.
  • 3003-H24 alloy: our standard for facades. It is stronger and more corrosion-resistant than pure aluminum.
  • 1100-H24 pure aluminum: about US$0.4–0.7/m² cheaper, but we do not recommend it for high wind loads or salty coastal air.

Browse our aluminum solid panel products.

Add-on prices

Option Price change (US$/m²) Notes
Three-coat PVDF +2.1–2.8 Better weathering for high-rise and strong UV
Polyester powder coat (interior) −2.8–3.4 Not for long-term outdoor use
Wood-grain or stone-grain transfer +4.1–6.9 Outdoor weather-resistant grain: +1.4 more
Round-hole perforation (ø ≥ 3 mm, open area ≤ 30%) +2.8–4.1 +0.7 for every extra 10% open area
Laser-cut pattern +11.0–27.6 Depends on pattern complexity and cutting length
Single-curved panel +5.5–11.0 Smaller radius costs more
Double-curved panel +20.7–41.4 3D forming, longer lead time
Anodized finish +8.3–13.8 No coating, hard surface, premium projects

Size limits and surcharges

  • Maximum size: 1,800 mm wide × 8,000 mm long.
  • Wide panels: above 1,300 mm wide, add US$1.1–1.7/m² for every extra 100 mm; above 1,600 mm, priced case by case.
  • Long panels: above 4,000 mm long, add US$0.7–1.1/m² for every extra 1,000 mm. Long panels also cost more to ship.
  • Small panels: no surcharge above 0.3 m² unfolded; US$1.4–2.1/m² extra below 0.3 m²; below 0.1 m², priced per piece at US$2.1–2.8 each.

Sub-frame and installation

Our panel prices do not include the sub-frame, insulation or installation labor. If you buy the sub-frame locally, budget roughly:

Sub-frame system (incl. connectors, bolts, embeds) Cost (US$/m²)
Standard hot-dip galvanized steel (50 × 50 × 4 angle + 40 × 40 × 4 verticals) 9.7–11.7
Heavy-duty steel for high wind loads 12.4–15.2
Aluminum sub-frame 16.6–20.7

We can also supply the sub-frame with the panels on a separate quotation, without installation.

Lead time

Panel type Lead time after drawing approval and deposit
Flat panels, standard colors 7–10 days
Perforated or single-curved panels 12–18 days
Double-curved, laser-cut, special colors or wood grain 20–28 days

Add 2–3 days for export crating and inspection.

Packing and container loading

Panels are packed in fumigation-free plywood crates with steel straps. Each panel is separated with EPE foam and the corners are protected; we do not use cartons for solid panels on long sea voyages.

Thickness Load per 40HQ
1.5–2.0 mm 2,200–2,500 m²
2.5–3.0 mm 1,800–2,200 m²
4.0 mm 1,400–1,700 m²

Perforated and shaped panels need more space in the crate, so a container holds 15–25% less. More details in our packaging and shipping guide.

Project example: high-end restaurant in Manila

For a high-end restaurant in Manila, we supplied gold aluminum solid panels for a faceted interior ceiling, together with a curved wood-grain aluminum tube facade and a baffle ceiling. Read the Manila restaurant case study.

How to compare solid panel quotes

  1. Same area basis: unfolded or projected?
  2. Same thickness: base-metal thickness, not including paint.
  3. Same paint: two-coat or three-coat PVDF, and which brand?
  4. Same scope: are stiffeners, brackets and crating included? Is the sub-frame included?
  5. Same alloy: 3003-H24 or 1100?

Not sure who you are buying from? Read Factory vs Trading Company: How to Choose an Aluminum Ceiling Supplier.

Get a quotation in 24 hours. MOQ is 300 m² for standard colors and thicknesses. Quotations are valid for 15 days. Get a Quote →

Compare all ceiling systems in Aluminum Ceiling Price per m²: What Affects the Cost.

FAQ

How much does an aluminum solid panel cost per m²?

A 2.5 mm panel with two-coat PVDF costs about US$35.9–37.2 per m² of unfolded area FOB Guangzhou in 2026. 2.0 mm starts at about US$31; 3.0 mm is about US$41.

Is the price per unfolded or projected area?

We price by unfolded area, with edges, stiffeners and brackets included. Projected-area pricing is available, but the unit price is about 10–20% higher.

What thickness is best for a facade?

2.5 mm suits most facades. Choose 3.0 mm or more for high-rise buildings, high wind loads, coastal sites or panels wider than about 1.3 m.

Does the price include the sub-frame?

No. A galvanized steel sub-frame costs about US$9.7–11.7 per m² extra. We can supply it on request.

How long is the lead time?

Flat panels in standard colors take 7–10 days; perforated or curved panels 12–18 days; double-curved, laser-cut or wood-grain panels 20–28 days, plus 2–3 days for crating.